Alerts

Alerts

Signal Name Description Condition Impact Important
Pedal Monitor Intervention: EBR Commands Invalid.
DI brake torque command failed plausiblity check
Automatic braking functionality is disabled
No
The Electronic Stability Program (ESP) receives a message over the controller area network (CAN) from the Gateway (GTW) that the Cyclic Redundancy Check (CRC) value received from the ESP is different than the value expected on GTW.
The CRC reported on CAN does not match the value expected on the GTW.
Vehicle may be unable to drive until the configuration mismatch is resolved.
No
The Electronic Stability Program (ESP) electronic control unit (ECU) receives invalid messages from the secondary drive inverter (DIS) ECU on the Party controller area network (CAN) bus.
The ECU ESP receives invalid messages from the DIS on the Party CAN bus.
Vehicle Dynamics Control (VDC) may be unavailable.
No
Invalid Data Received From Drive Motor Control Module A: Invalid Signal Status
DI CAN message received as invalid
Drive functions may be degraded.
No
Checksum error detected.
Checksum error detected.
Functions in ESP will be available still.
No
Invalid Data Received From Brake Booster iBooster : Invalid Signal Status.
IBST status is invalid on CAN
Brake boost is degraded.
No
Bosch DTC value: 0x0040314A
-
No
Bosch DTC value: 0x00406128
-
No
Bosch DTC value: 0x00406122
-
No
Checksum error detected.
Checksum error detected.
Functions in ESP will be available still.
No
Bosch DTC value: 0x00406109
-
No
Bosch DTC value: 0x00405162
-
No
Bosch DTC value: 0x00405128
-
No
Bosch DTC value: 0x00405126
-
No
Bosch DTC value: 0x0040497B
-
No
Bosch DTC value: 0x00404462
-
No
Bosch DTC value: 0x00404428
-
No
Bosch DTC value: 0x00404414
-
No
Bosch DTC value: 0x00404062
-
No
Bosch DTC value: 0x00404029
-
No