Alerts
Loading...
| Signal Name | Description | Condition | Impact | Important |
|---|---|---|---|---|
|
The front hub device has appeared on a vehicle where front hub data is configured as not available.
|
A front USB hub device has been installed a vehicle configured with no data connection.
|
The UI experience and features may not match front hub capabilities.
|
No
|
|
|
The front hub appears disconnected or powered off.
|
The front USB hub device has been removed from the system.
|
If the vehicle is awake and this alert is present, the hub may have faulted.
|
No
|
|
|
The main audio process (audiod) encounters a temporary error while transferring audio input data due to the audiod buffer timing out, which may cause audio interruptions.
|
Audiod did not receive audio input data in time to continue playing audio.
|
There may be an interruption in audio.
|
No
|
|
|
The infotainment CPU is limiting performance to adapt to power or temperature limitations.
|
Infotainment system temperature or input power supply detected as outside normal operating range.
|
Potentially degraded infotainment performance. Touchscreen may be unavailable or may not function as expected.
|
No
|
|
|
Temperature readings within the car computer assembly indicate a potential thermal problem affecting performance.
|
Temperature readings or deltas (differences between points) within the car computer assembly are outside normal operating ranges.
|
Potentially degraded infotainment performance. Touchscreen may be unavailable or may not function as expected.
|
No
|
|
|
The infotainment processor is running hotter than the normal expected operating range.
|
Infotainment CPU temperature detected as exceeding expected operating threshold.
|
Potentially degraded infotainment performance. Touchscreen may be unavailable or may not function as expected.
|
No
|
|
|
The User Interface (UI) Display Manager detects an error affecting the functionality of the center display.
|
The UI Display Manager detects an error. Alert log signal data should provide more information on the specific condition(s) detected.
|
The center display may be blank, frozen, or unresponsive to touch inputs.
|
No
|
|
|
The center display Automotive Safety Integrity Level (ASIL) register reports a non-zero status.
|
Software check of ASIL status register found non-zero status
|
Center display functionality may be unavailable.
|
No
|
|
|
Correctable memory errors were reported by the memory controller
|
Number of correctable memory errors greater than zero
|
No impact to the customer as errors were correctable
|
No
|
|
|
Falcon door open when gear is D/R/N. Triggers a continuous chime
|
Falcon door open when gear is D/R/N
|
Potential danger of open door whilst driving
|
No
|
|
|
Pending configuration changes will apply once the vehicle is parked
|
Vehicle has received a gateway configuration change while in gear
|
Infotainment system will reboot when vehicle parked with display(s) off
|
No
|
|
|
System will reboot to apply configuration changes
|
Vehicle has received a gateway configuration change while parked
|
Infotainment system will reboot after a few seconds
|
No
|
|
|
There is an active connection to service shell
|
Connection to infotainment by service technician
|
Change in car computer state during customer use
|
No
|
|
|
The USB Drive has experiened a no medium error
|
Mounterd has experienced an error 123 when scanning for block filesystems
|
The USB device has no filesystem and cannot communicate
|
No
|
|
|
Adsp watchdog encountered an error with recovery
|
Adsp watchdog has failed to recover after multiple errors
|
Loss of audio
|
No
|
|
|
Adsp watchdog recovery has been triggered
|
Adsp watchdog has triggered due to multiple errors
|
Interruption of audio
|
No
|
|
|
There are errors associated with the dGPU
|
One or more malfunctions: dGPU, board-to-board connector, MCU PCB, or SoC
|
Graphics performance deteriorated
|
No
|
|
|
Unable to detect a functional dGPU
|
Missing dGPU, dGPU malfunction or communication link issues preventing dgpu detection
|
Graphics performance deteriorated
|
No
|
|
|
The drive is likely corrupt and should be reformatted
|
Mounterd experienced an error while scanning the new USB device with fsck
|
The USB device will not be mounted and should be removed
|
No
|
|
|
Critical warning bits are set in the NVMe smart log
|
Critical warning bits are turned on in the smart log
|
NVMe subsystem reliability might be affected
|
No
|