Alerts
Loading...
| Signal Name | Description | Condition | Impact |
|---|---|---|---|
|
Timeout error detected.
|
Timeout error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Data length code error detected.
|
Data length code error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Checksum error detected.
|
Checksum error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Alive counter error detected.
|
Alive counter error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Alive counter error detected.
|
Alive counter error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Timeout error detected.
|
Timeout error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Data length code error detected.
|
Data length code error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Checksum error detected.
|
Checksum error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Alive counter error detected.
|
Alive counter error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Timeout error detected.
|
Timeout error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Data length code error detected.
|
Data length code error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Checksum error detected.
|
Checksum error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
Alive counter error detected.
|
Alive counter error detected.
|
System will be running with full assistant for driver brake request.
|
|
|
On the system ASIC an overcurrent event occured on WRHS.
|
Overcurrent was detected. Overcurrent bit of ASIC is checked and the GPIO is switched off for certain seconds.
|
System will be running with full assistant for driver brake request.
|
|
|
ASICOvercurrentOnGPIO50 On the system ASIC an overcurrent event occured on GPIO50_4.
|
Overcurrent was detected. Overcurrent bit of ASIC is checked and the GPIO is switched off for certain seconds.
|
System will be running with full assistant for driver brake request.
|
|
|
ASICOvercurrentOnGPIO50 On the system ASIC an overcurrent event occured on GPIO50_3.
|
Overcurrent was detected. Overcurrent bit of ASIC is checked and the GPIO is switched off for certain seconds.
|
System will be running with full assistant for driver brake request.
|
|
|
ASICOvercurrentOnGPIO50 On the system ASIC an overcurrent event occured on GPIO50_2.
|
Overcurrent was detected. Overcurrent bit of ASIC is checked and the GPIO is switched off for certain seconds.
|
System will be running with full assistant for driver brake request.
|
|
|
ASICOvercurrentOnGPIO50 On the system ASIC an overcurrent event occured on GPIO50_1.
|
Overcurrent was detected. Overcurrent bit of ASIC is checked and the GPIO is switched off for certain seconds.
|
System will be running with full assistant for driver brake request.
|
|
|
ASICOvercurrentOnGPIO250 On the system ASIC an overcurrent event occured on GPIO250_2.
|
Overcurrent was detected. Overcurrent bit of ASIC is checked and the GPIO is switched off for certain seconds.
|
System will be running with full assistant for driver brake request.
|
|
|
On the system ASIC an overcurrent event occured. The General Purpose Input Output (GPIO) is not operating as expected.
|
This fault will be reported if the GPIO is switched off but the overcurrent bit of the ASIC remains set (GPIO is not operating as expected).
|
System will be running in fully degraded state. Braking may require increased effort. Hydraulic Boost Compensation will be triggered when driver pressed brake pedal.
|