Alerts
Loading...
| Signal Name | Description | Condition | Impact |
|---|---|---|---|
|
The motor isn't responding.
|
Motor current is 0
|
seat motor can't move
|
|
|
The motor isn't responding.
|
Motor current is 0
|
seat motor can't move
|
|
|
The motor isn't providing encoder feedback.
|
Current draw is nonzero and not stalling but encoder values don't increase
|
Memory recall will be unavailable
|
|
|
The motor isn't providing encoder feedback.
|
Current draw is nonzero and not stalling but encoder values don't increase
|
Memory recall will be unavailable
|
|
|
12V battery temperature sensor damaged/shorted.
|
|
12V battery may experience accelerated degradation
|
|
|
12V battery temperature sensor disconnected.
|
|
12V battery may experience accelerated degradation
|
|
|
The reverse battery protection faulted and a retry occurred.
|
|
Rev Batt may have been falsely tripped
|
|
|
The reverse battery protection mosfett is faulted.
|
|
The vehicle could be unsupported, 12V could die.
|
|
|
Air compressor driver circuitry indicates a faulted condition.
|
Air compressor driver reported a fault for an extended period.
|
Air suspension compressor disabled.
|
|
|
Indicates there was a fault reported on an I2C bus.
|
I2C fault reported
|
-
|
|
|
Abnormal Pulse Width Modulation (PWM) signal received from the front left PWM height sensor.
|
Abnormal PWM signal received from front left ride height sensor.
|
Air suspension leveling will be disabled. Systems with adaptive dampers will disable active damping control.
|
|
|
Frunk overcurrent condition has been encountered.
|
|
-
|
|
|
Condenser Fan Self Test Failed due to a fault condition.
|
|
Condenser Fan feed may go unpowered.
|
|
|
IBooster Self Test Failed due to a fault condition.
|
|
IBooster feed may go unpowered.
|
|
|
HCU ESP ABS Self Test Failed due to a fault condition.
|
|
HCU ESP ABS feed may go unpowered.
|
|
|
Cabin BEC Self Test Failed due to a fault condition.
|
|
Cabin BEC feed may go unpowered.
|
|
|
EPAS Secondary Self Test Failed due to a fault condition.
|
|
EPAS Secondary feed may go unpowered.
|
|
|
EPAS Primary Self Test Failed due to a fault condition.
|
|
EPAS Primary feed may go unpowered.
|
|
|
Frunk BEC Self Test Failed due to a fault condition.
|
|
Frunk BEC feed may go unpowered.
|
|
|
DCDC Self Test Failed due to a fault condition.
|
|
DCDC feed may go unpowered.
|