Alerts

Alerts

Signal Name Description Condition Impact Important
The iBooster (IBST) detects the brake pedal is blocked.
IBST reports the brake pedal is blocked.
Rate of deceleration while braking is reduced. A loud vibrating noise from the Anti-Lock Braking System (ABS) pump is present during braking events.
No
iBooster (IBST) detected a replacement error due to a NET undervoltage condition.
IBST detected a replacement error due to a NET undervoltage condition.
IBST may not operate as expected.
No
iBooster (IBST) detected a replacement error due to a NET overvoltage condition.
IBST detected a replacement error due to a NET overvoltage condition.
IBST may not operate as expected.
No
iBooster (IBST) detected reference run failed.
IBST detected reference run failed.
IBST may not operate as expected.
No
iBooster (IBST) detected a mismatch between IBST and power pack.
IBST detected a mismatch between IBST and power pack.
IBST may not operate as expected.
No
iBooster (IBST) detected Lips IDs are unavailable in the current power cycle.
IBST detected Lips IDs are unavailable in the current power cycle.
IBST may not operate as expected.
No
iBooster (IBST) detected find idle data can not be read.
IBST detected find idle data can not be read.
IBST may not operate as expected.
No
iBooster (IBST) detected Differential Travel Sensor (DTS) offset is suspiciously too high.
IBST detected DTS offset is suspiciously too high.
IBST may not operate as expected.
No
iBooster (IBST) detected an invalid value in the master cyclinder. Scl: ESPiB3_pMC1 Invalid Value.
IBST detected an invalid value in the master cyclinder. Scl: ESPiB3_pMC1 Invalid Value.
IBST may not operate as expected.
No
iBooster (IBST) detected UBB voltage is in overvoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
IBST detected UBB voltage is in overvoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
IBST may not operate as expected.
No
iBooster (IBST) detected UBB voltage is in undervoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
IBST detected UBB voltage is in undervoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
IBST may not operate as expected.
No
iBooster (IBST) detected actual voltage is not plausible depending on the motor current and speed.
IBST detected actual voltage is not plausible depending on the motor current and speed.
IBST may not operate as expected.
No
iBooster (IBST) detected the value in the Non-volatile Memory (NvM) block 'Gear_Ratio' is incorrect or 'empty'.
IBST detected the value in the NvM block 'Gear_Ratio' is incorrect or 'empty'.
IBST may not operate as expected.
No
Bosch DTC value: 0x00006A00
-
No
Bosch DTC value: 0x00006800
-
No
iBooster (IBST) detected a hardware failure impacting motor control during motor test.
IBST detected a hardware failure impacting motor control during motor test.
IBST may not operate as expected.
No
iBooster (IBST) detected a 'read failed' condition for parameter 'Vehicle_TMC_area_mm2'.
IBST detected a 'read failed' condition for parameter 'Vehicle_TMC_area_mm2'.
IBST may not operate as expected.
No
iBooster (IBST) detected a 'read failed' condition for parameter 'gain_mech'.
IBST detected a 'read failed' condition for parameter 'gain_mech'.
IBST may not operate as expected.
No
iBooster (IBST) detected the value in the Non-volatile Memory (NvM) block 'PSC_MotorSize' is incorrect or 'empty'.
IBST detected the value in the NvM block 'PSC_MotorSize' is incorrect or 'empty'.
IBST may not operate as expected.
No
The brake booster (IBST) does not receive a message from the Electronic Stability Program (ESP) within the expected time frame.
IBST does not receive a message from the ESP over Party CAN within the expected time frame.
IBST may not operate as expected.
No