Alerts

Alerts

Signal Name Description Condition Impact
iBooster (IBST) detected a read failure due to one or more Non-volatile Memory (NvM) items differentiating with debug data: RPS_Offset RPS_Rescaling, RPS_CorrAmplitudes, RPS_CorrPhases, or RPS_Version.
IBST detected a read failure due to one or more NvM items differentiating with debug data: RPS_Offset RPS_Rescaling, RPS_CorrAmplitudes, RPS_CorrPhases, or RPS_Version.
IBST may not operate as expected.
iBooster (IBST) detected UBB voltage is in overvoltage level 2 failure range. System shall be in 'ReducedPerformance' state.
IBST detected UBB voltage is in overvoltage level 2 failure range. System shall be in 'ReducedPerformance' state.
IBST may not operate as expected.
iBooster (IBST) detected UBB voltage is in undervoltage level 2 failure range. System shall be in 'ReducedPerformance' state.
IBST detected UBB voltage is in undervoltage level 2 failure range. System shall be in 'ReducedPerformance' state.
IBST may not operate as expected.
iBooster (IBST) detected a BusOff failure on Controller Area Network (CAN) 2 (CHASSIS).
IBST detects a BusOff failure on CAN 2 (CHASSIS)
IBST may not operate as expected.
CiBooster (IBST) detected a BusOff failure on Controller Area Network (CAN) 1 (PARTY).
IBST detects a BusOff failure on CAN 1 (PARTY)
IBST may not operate as expected.
iBooster (IBST) detected a linear position sensor channel 1 sensor internal failure.
IBST detected a linear position sensor channel 1 sensor internal failure.
IBST may not operate as expected.
iBooster (IBST) detected linear position sensor channel 1 failure in Single Edge Nibble Transmission (SENT) protocol.
IBST detects linear position sensor channel 1 failure in SENT protocol.
IBST may not operate as expected.
Bosch DTC value: 0x0000C100
-
Bosch DTC value: 0x00004F00
-
Bosch DTC value: 0x0000BB00
-
Bosch DTC value: 0x00002500
-
Bosch DTC value: 0x0000B900
-
Bosch DTC value: 0x0000AB00
-
Bosch DTC value: 0x0000AA00
-
Bosch DTC value: 0x0000A700
-
Bosch DTC value: 0x00001C00
-
The CAN Bus status is monitored cyclically, whenever there is a short circuit between CAN-H and CAN-L or a heavy bus disturbance which leads to BusOff, the fault is registered.
ESP is not receiving any message traffic on BRAKE bus
Vehicle hold and AutoPilot disabled
iBooster (IBST) has detected right Controller Area Network (CAN) bus communication interruption due to failure state detection.
CAN communication errors leading to 'BusOff' mode activation.
Affects network connectivity between right CAN devices.
Bosch DTC value: 0x00007D00
-
Bosch DTC value: 0x00008500
-