Alerts
Loading...
| Signal Name | Description | Condition | Impact |
|---|---|---|---|
|
iBooster (IBST) detected a mismatch between IBST and power pack.
|
IBST detected a mismatch between IBST and power pack.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected Lips IDs are unavailable in the current power cycle.
|
IBST detected Lips IDs are unavailable in the current power cycle.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected find idle data can not be read.
|
IBST detected find idle data can not be read.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected Differential Travel Sensor (DTS) offset is suspiciously too high.
|
IBST detected DTS offset is suspiciously too high.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected an invalid value in the master cyclinder. Scl: ESPiB3_pMC1 Invalid Value.
|
IBST detected an invalid value in the master cyclinder. Scl: ESPiB3_pMC1 Invalid Value.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected UBB voltage is in overvoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
|
IBST detected UBB voltage is in overvoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected UBB voltage is in undervoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
|
IBST detected UBB voltage is in undervoltage level 1 failure range. System shall be in 'ReducedPerformance' state.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected actual voltage is not plausible depending on the motor current and speed.
|
IBST detected actual voltage is not plausible depending on the motor current and speed.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected the value in the Non-volatile Memory (NvM) block 'Gear_Ratio' is incorrect or 'empty'.
|
IBST detected the value in the NvM block 'Gear_Ratio' is incorrect or 'empty'.
|
IBST may not operate as expected.
|
|
|
Bosch DTC value: 0x00006A00
|
|
-
|
|
|
Bosch DTC value: 0x00006800
|
|
-
|
|
|
iBooster (IBST) detected a hardware failure impacting motor control during motor test.
|
IBST detected a hardware failure impacting motor control during motor test.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected a 'read failed' condition for parameter 'Vehicle_TMC_area_mm2'.
|
IBST detected a 'read failed' condition for parameter 'Vehicle_TMC_area_mm2'.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected a 'read failed' condition for parameter 'gain_mech'.
|
IBST detected a 'read failed' condition for parameter 'gain_mech'.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected the value in the Non-volatile Memory (NvM) block 'PSC_MotorSize' is incorrect or 'empty'.
|
IBST detected the value in the NvM block 'PSC_MotorSize' is incorrect or 'empty'.
|
IBST may not operate as expected.
|
|
|
The brake booster (IBST) does not receive a message from the Electronic Stability Program (ESP) within the expected time frame.
|
IBST does not receive a message from the ESP over Party CAN within the expected time frame.
|
IBST may not operate as expected.
|
|
|
The brake booster (IBST) does not receive a message from the Electronic Stability Program (ESP) within the expected time frame.
|
IBST does not receive a message from the ESP over Party CAN within the expected time frame.
|
IBST may not operate as expected.
|
|
|
The brake booster (IBST) does not receive a message from the Electronic Stability Program (ESP) within the expected time frame.
|
IBST does not receive a message from the ESP over Party CAN within the expected time frame.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected Differential Travel Sensor (DTS) offset is confirmed too high.
|
IBST detected DTS offset is confirmed too high.
|
IBST may not operate as expected.
|
|
|
iBooster (IBST) detected Differential Travel Sensor (DTS) offset is too low.
|
IBST detects DTS offset is too low.
|
IBST may not operate as expected.
|