Alerts
Loading...
| Signal Name | Description | Condition | Impact | Important |
|---|---|---|---|---|
|
iBooster (IBST) detected a condition in the Analog-to-Digital Converter (ADC) peripheral.
|
IBST detects a condition in the ADC peripheral.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) Analog-to-Digital Converter (ADC) self test C5P detected a failure.
|
IBST ADC self test C5P detects a failure.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) Analog-to-Digital Converter (ADC) pin test detected an open ADC pin.
|
IBST ADC pin test detects an open ADC pin.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected and Electronic Control Unit (ECU) bandgap failure.
|
IBST ECU Badgap failure detected.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected a Voltage Precharge (VPRE) external feed. An internal short-circuit condition may have occurred.
|
IBST detects VPRE was fed externally.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) task monitor reports an error status.
|
IBST task monitor reports an error status.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected an error in dual core SW Built-In Self Test (BIST) comparison.
|
IBST detects dual core SW BIST comparison error.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected at least one command number for safe backbone monitoring not scheduled from Application-Specific Integrated Circuit (ASIC) watchdog.
|
IBST detected at least one command number for safe backbone monitoring not scheduled from ASIC watchdog.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected the number of watchdog trigger patterns is too high.
|
IBST detected the number of watchdog trigger patterns is too high.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected watchdog on Application-Specific Integrated Circuit (ASIC) does not react on incorrect trigger pattern.
|
IBST detects watchdog on ASIC does not react on incorrect trigger pattern.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected a failure word in case of write service to Electrically Erasable Programmable Read-Only Memory (EEPROM) was unable to complete in expected time interval.
|
IBST detects a failure word in case of write service to EEPROM was unable to complete in expected time interval.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected Serial Peripheral Interface (SPI) transfer to Application-Specific Integrated Circuit (ASIC) failed. Condition can occur due to an error frame incorrect address or timeout CSIH error.
|
IBST detects SPI transfer to ASIC has failed.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected Application-Specific Integrated Circuit (ASIC) initialization test failed during the initialization task.
|
IBST detected ASIC initialization test failed during the initialization task.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected an internal non-serviceable condition with the Clock Input (CLKIN) on its Application-Specific Integrated Circuit (ASIC).
|
IBST detects an internal non-serviceable condition with CLKIN on its ASIC.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected a Generic Timer Module (GTM) reference frequency error.
|
IBST detects a GTM reference frequency error.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected a Generic Timer Module (GTM) reference frequency error.
|
IBST detects a GTM reference frequency error.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) continuous monitor of enable lines detected a missing (low) enable signal.
|
IBST continuous monitor of enable lines detected a missing (low) enable signal.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected watchdog status of system integrate circuit (IC) deviates from the expected status.
|
IBST detects watchdog status of system IC deviates from expected status.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected control over MRG via EN_HY or MRAUC or both is not functional.
|
IBST detects control over MRG via EN_HY or MRAUC or both is notn functional.
|
IBST may not operate as expected.
|
No
|
|
|
iBooster (IBST) detected the hydraulic enable line is unable to switch off via the uC and via the system Integrated Circuit (IC).
|
IBST hydraulic enable is unable to switch off via the uC port and system IC.
|
IBST may not operate as expected.
|
No
|