Alerts
Loading...
| Signal Name | Description | Condition | Impact |
|---|---|---|---|
|
Pedal Monitor Slave Warning: Accumulated Torque
|
|
-
|
|
|
Pedal Monitor Slave Warning: Torque Reversal
|
|
-
|
|
|
Pedal Monitor Slave Warning: Deceleration Torque
|
|
-
|
|
|
Pedal Monitor Slave Warning: Torque Detected in non-torque producing gear
|
|
-
|
|
|
PM_d009_unused
|
|
-
|
|
|
PM_d008_unused
|
|
-
|
|
|
PM_d007_unused
|
|
-
|
|
|
PM_d006_unused
|
|
-
|
|
|
PM_d005_unused
|
|
-
|
|
|
PM_d004_unused
|
|
-
|
|
|
PM_d003_unused
|
|
-
|
|
|
PM_d002_unused
|
|
-
|
|
|
PM_d001_unused
|
|
-
|
|
|
The Indirect Tire Pressure Monitoring System (ITPMS) estimates the pressure of one or more tires is at least 20% less than the recommended cold pressure.
|
ITPMS estimates the pressure of one or more front tires is at least 20% less than the recommended cold pressure.
|
The TPMS indicator light will be present. One or more tires may be flat or have a pressure leak.
|
|
|
The Pedal Monitor (PM) processor has detected an internal exception. This alert does not on its own indicate a symptom or root cause.
|
The PM processor detects an exception.
|
This alert is primarily informational and is used for logging purposes.
|
|
|
Pedal Monitor Warning: Crystal oscillator inactive.
|
This condition is at application boot when the external crystal is not the active clock source.
|
Unit may have limited torque or torque disablement with this alert present, see other active alerts for more details.
|
|
|
Pedal Monitor Warning: EBS CAN node MIA.
|
PM is not receiving required feedback CAN messages from EBS
|
Unable to monitor EBS state
|
|
|
Pedal Monitor Warning: Intra-axle torque actuals are excessively large.
|
The safety monitor sets this condition when a torque production error is detected.
|
The safety monitor will disable innhibit torque production for the remainder of the drive cycle.
|
|
|
Pedal Monitor Warning: DIRE2 CAN node MIA.
|
PM is not receiving required feedback CAN messages from DIRE2
|
Unable to monitor DIRE2 state
|
|
|
Pedal Monitor Warning: CCCM CAN node is missing.
|
The safety monitor sets this condition when CAN communication from CCCM is considered irrational or missing.
|
PM system is unable to receive shift requests from secondary source.
|