Alerts
Loading...
| Signal Name | Description | Condition | Impact | Important |
|---|---|---|---|---|
|
The front seat heater is not drawing current, which may lead to the seat heater not performing as designed.
|
The eFuse on the front controller is not tripped and the current drawn by the front seat heater is 0 amps.
|
The front seat heater may not perform as designed.
|
No
|
|
|
The motor has traveled beyond the expected range
|
seat position goes outside the acceptable range
|
Seat may be in an unstable position or a mechanism may have failed
|
No
|
|
|
The bladder A has exceeded pressure limits
|
Bladder pressure exceeds 1300hPa (absolute)
|
Damage to bladder or valve block
|
No
|
|
|
The motor isn't responding
|
Motor current is 0
|
seat motor can't move
|
No
|
|
|
The motor isn't responding
|
Motor current is 0
|
seat motor can't move
|
No
|
|
|
The valveblock isn't inflating or deflating when commanded
|
commands sent over lin solicit no action from the lumbar
|
lumbar isn't functional
|
No
|
|
|
One or more of the messages the vehicle controller receives periodically from the drive interface (DI) electronic control unit (ECU) is not received while the vehicle is in Drive, indicating the DI ECU may be unavailable (MIA).
|
One or more of the expected messages from the DI ECU is not received while the vehicle is in Drive.
|
Vehicle speed and power may be limited.
|
No
|
|
|
The motor isn't providing encoder feedback
|
Current draw is nonzero and not stalling but encoder values don't increase
|
Memory recall will be unavailable
|
No
|
|
|
The motor isn't providing encoder feedback
|
Current draw is nonzero and not stalling but encoder values don't increase
|
Memory recall will be unavailable
|
No
|
|
|
The motor has traveled beyond the expected range
|
seat position goes outside the acceptable range
|
Seat may be in an unstable position or a mechanism may have failed
|
No
|
|
|
The motor has traveled beyond the expected range
|
seat position goes outside the acceptable range
|
Seat may be in an unstable position or a mechanism may have failed
|
No
|
|
|
The motor isn't responding
|
Motor current is 0
|
seat motor can't move
|
No
|
|
|
The motor isn't responding
|
Motor current is 0
|
seat motor can't move
|
No
|
|
|
One or more of the messages the vehicle controller receives periodically from the Positive Temperature Coefficient (PTC) heater electronic control unit (ECU) is not received, indicating the PTC heater ECU may be unavailable (MIA).
|
One or more of the expected messages from the PTC heater ECU is not received.
|
Thermal management system features depending on PTC heater functionality may be limited or unavailable.
|
No
|
|
|
One or more of the messages the vehicle controller receives periodically from the Pedal Monitor (PM) electronic control unit (ECU) is not received, indicating the PM ECU may be unavailable (MIA).
|
One or more of the expected messages from the PM ECU is not received.
|
Vehicle speed and power may be limited.
|
No
|
|
|
One or more expected Controller Area Network (CAN) messages from the Park Assist (PARK) electronic control unit (ECU) was not received. Autopark and Summon functions may be unavailable, or their performance may be affected.
|
An expected CAN message from the Park Assist (PARK) electronic control unit (ECU) has not been received within the expected timeout, or the message drop rate is too high while the park assist ECU is CAN active. The PARK ECU is considered CAN active when VCFRONT_chGoToSleep is 0 AND VCFRONT_parkLVState is LV_ON.
|
Autopark and Summon functions may be unavailable, or their performance may be affected.
|
No
|
|
|
One or more of the messages the vehicle controller receives periodically from the charge port (CP) electronic control unit (ECU) is not received, indicating the CP ECU may be unavailable (MIA).
|
The vehicle controller does not receive one or more of the expected messages from the CP ECU within the expected time frame.
|
Charging may not start or may be interrupted unexpectedly.
|
No
|
|
|
One or more of the messages the vehicle controller receives periodically from the front passenger seat controller (VCSEATP) is not received, indicating the VCSEATP may be unavailable (MIA).
|
One or more of the expected messages from the VCSEATP is not received.
|
Front passenger seat features depending on VCSEATP functionality, including seat buckle and heating pad, may be limited or unavailable.
|
No
|
|
|
One or more of the messages the vehicle controller receives periodically from the driver seat controller (VCSEATD) is not received, indicating the VCSEATD may be unavailable (MIA).
|
One or more of the expected messages from the VCSEATD is not received.
|
Driver seat features depending on VCSEATD functionality, including seat buckle and heating pad, may be limited or unavailable.
|
No
|
|
|
One or more of the messages the vehicle controller receives periodically from the Primary Electronic Power-Assisted Steering (EPAS3P) electronic control unit (ECU) is not received, indicating the EPAS3P ECU may be unavailable (MIA).
|
One or more of the expected messages from the EPAS3P ECU is not received.
|
Vehicle functions that depend on the EPAS3P may be unavailable or may not function as expected.
|
No
|