Alerts
Loading...
| Signal Name | Description | Condition | Impact |
|---|---|---|---|
|
Pedal Monitor Fault: Deceleration Torque
|
|
-
|
|
|
Pedal Monitor Fault: Torque Reversal
|
|
-
|
|
|
Pedal Monitor Fault: Accumulated Torque
|
|
-
|
|
|
Pedal Monitor Fault: Absolute Torque
|
|
-
|
|
|
One of the PPB CAN signals used to determine air tank pressures has gone MIA.
|
PPB has missed 10 samples of one of the CAN signals PPB uses for air tank pressure
|
N/A
|
|
|
Solenoid monitor detected incorrect solenoid behavior.
|
Incorrect solenoid activity was detected by the solenoid monitor
|
Park brakes solenoids may be improperly wired
|
|
|
Vehicle park brake operating mode is not normal - User has entered a non-normal operating mode.
|
User has set the park brakes into a non-normal state
|
Park brakes will not oprate as nominally expected
|
|
|
Internal PPB software is detecting the incorrect CAN baud rate between processors.
|
Incorrect vehicle programming detected
|
Vehicle park brake functions are lost
|
|
|
Internal trailer brake monitor has detected an issue with releasing.
|
Internal trailer brake monitor has detected an issue with releasing
|
Trailer park brake release may not occur
|
|
|
One of the CAN nodes that PPB expects to receive messages from is MIA.
|
10 message samples from a node PPB is relying on for functions is MIA
|
Features that rely on these signals may not function - Anti-rollaway, Exhaust at speed
|
|
|
Anti-rollaway feature issue detected.
|
Anti-rollaway issue detected - Taking longer then it should or activating when it should not
|
Loss of Anti-rollaway feature
|
|
|
Trailer switch button hardware issue detected.
|
Hardware issue is detected with the trailer switch
|
Unable to park or unpark
|
|
|
Tractor switch button hardware issue detected.
|
Hardware issue is detected with the tractor switch
|
Unable to park or unpark
|
|
|
Unpark prevented due to Anti Rollaway requiring user Acknowledgment.
|
Driver attempts to unpark with active ARA Acknowledgment
|
Tractor/Trailer unpark request not honored
|
|
|
Not capable of Parking / Unparking due to park brake fault.
|
Park Brake System fault present
|
Park Brake Faulted
|
|
|
Tractor or Trailer LED hardware issue detected.
|
Tractor or Trailer LED hardware issue detected
|
Incorrect or unavailable LED Status for tractor or trailer
|
|
|
Occupancy sensor short, switch button monitoring or voltage incompatibility detected.
|
Alert payload reason is detected
|
Loss of button monitoring, unparking or other features
|
|
|
Dataset EEPROM may be corrupted or incorrect.
|
Problem with dataset EEPROM memory detected
|
Loss of all PPB functionality
|
|
|
One of the interlocks required for PPB to Unpark is errored or invalid.
|
One of the interlock sources over CAN is being reported by PPB as error or invalid
|
Unpark is not allowed
|
|
|
PPB's received vehicle speed source fault detected.
|
One of the speed sources that PPB uses is showing error or invalid
|
Motion state may not be able to be determined - Used in ARA, EAS
|