Alerts

Alerts

Signal Name Description Condition Impact
Incorrect, missing, or unsupported board part number programmed.
The BMS detects an unexpected board part number
The BMS is unable to initialize parameters related to printed circuit board assembly (PCBA) configuration
Battery pack 1 has pack voltage too low to allow dcdc support.
Battery pack 1 has pack voltage below the voltage too low set threshold
LV support may be blocked
BCS2R_w113_3RSeatHeatOverCurr
-
This alert is an early warning for SocImbalance. It triggers with a lower threshold than SocImbalance.
The estimated imbalance between average SOC and min SOC > SOC_IMBALANCE_WARNING_SET_THRESHOLD
Indication that brick imbalance is increasing and may result in SocImbalance alert
Battery Management System Semi (BMSSEMI) detects a state of charge (SOC) imbalance due to a difference in SOC of brick with max SOC and brick with min SOC exceeds the maximum SOC imbalance threshold.
The difference in state of charge of brick with max SOC and brick with min SOC exceeds the maximum state of charge imbalance threshold.
Reduced range while driving and reduced energy added while charging.
A vehicle condition has been detected while charging or attempting to charge.
A vehicle condition has occurred while attempting to charge and no more retries are available.
Vehicle will be unable to charge.
BC_w014_remoteAccessRejected
-
BC_w013_reverseLightFail
-
BC_w012_rearRightFogLightFail
-
BC_w011_rearLeftFogLightFail
-
BC_w010_frontRightFogLightFail
-
BC_w009_frontLeftFogLightFail
-
BC_w008_rightBrakeLightFail
-
BC_w007_leftBrakeLightFail
-
BC_w006_rightHeadLightFail
-
BC_w005_leftHeadLightFail
-
BC_w004_rightTailLightFail
-
BC_w003_leftTailLightFail
-
BC_w002_rightIndicatorFail
-
BC_w001_leftIndicatorFail
-