Alerts
Loading...
Signal Name | Description | Condition | Impact |
---|---|---|---|
3rd Row Right Head Airbag - Not configured in firmware but physically present.
|
There is an issue with the 3rd row right head airbag.
|
The 3rd row right head airbag may not perform as designed.
|
|
3rd Row Right Head Airbag - Cross coupled.
|
There is a cross coupling with the 3rd row right head airbag.
|
The 3rd row right head airbag may not perform as designed.
|
|
3rd Row Right Head Airbag - Resistance too low.
|
There is a low resistance with the 3rd row right head airbag.
|
The 3rd row right head airbag may not perform as designed.
|
|
3rd Row right Head Airbag - Resistance too high.
|
There is a high resistance with the 3rd row right head airbag.
|
The 3rd row right head airbag may not perform as designed.
|
|
3rd Row Right Head Airbag - Short to Battery.
|
There is a short to battery with the 3rd row right head airbag.
|
The 3rd row right head airbag may not perform as designed.
|
|
3rd Row Right Head Airbag - Short to Ground.
|
There is an issue with the 3rd row right head airbag.
|
The 3rd row right head airbag may not perform as designed.
|
|
EU vehicle type approval string is not learned.
|
EU EDR BOL bit == 1 && factory default string (0xFF) is detected in RDBI FD45.
|
Homologation requirement to program Whole Vehicle Type Approval String is not met.
|
|
0x40A VCLEFT_restraintStatus - Second Row Center Buckle Status SNA or Issue.
|
The restraint control module has detected an issue with the second-row center seat buckle.
|
The Safety Restraint System may not perform as designed.
|
|
Beginning-of-line device configuration not complete.
|
The beginning-of-line device configuration has not been performed.
|
The Safety Restraint System may not perform as designed.
|
|
RCM_a017_passABStage2
|
There is a fault with the second stage of the passenger airbag.
|
The restraint system may not function as designed.
|
|
Beginning-of-line device configuration does not satisfy minimum configuration parameters.
|
Beginning-of-line device configuration does not satisfy minimum configuration parameters.
|
The Safety Restraint System may not perform as designed.
|
|
An autarky event was detected.
|
The RCM lost power during a crash event.
|
The Safety Restraint System may not perform as designed.
|
|
2nd Row Center Seatbelt Retractor Pretensioner - Not Configured in Firmware but Physcially Present.
|
There is an issue with the 2nd row-center shoulder pretensioner.
|
The 2nd Row Center Shoulder Pretensioner may not perform as designed.
|
|
2nd Row Center Seatbelt Retractor Pretensioner - Cross Coupled.
|
There is a cross coupling with the 2nd row-center shoulder pretensioner.
|
The 2nd Row Center Shoulder Pretensioner may not perform as designed.
|
|
2nd Row Center Seatbelt Retractor Pretensioner - Resistance too Low.
|
There is a low resistance with the 2nd row-center shoulder pretensioner.
|
The 2nd Row Center Shoulder Pretensioner may not perform as designed.
|
|
2nd Row Center Seatbelt Retractor Pretensioner - Resistance too High.
|
There is a high resistance with the 2nd row-center shoulder pretensioner.
|
The 2nd Row Center Shoulder Pretensioner may not perform as designed.
|
|
2nd Row Center Seatbelt Retractor Pretensioner - Short to Battery.
|
There is a short to battery with the 2nd row-center shoulder pretensioner.
|
The 2nd Row Center Shoulder Pretensioner may not perform as designed.
|
|
2nd Row Center Seatbelt Retractor Pretensioner - Short to Ground.
|
There is an issue with the 2nd row-center shoulder pretensioner.
|
The 2nd Row Center Shoulder Pretensioner may not perform as designed.
|
|
1st Row Center Seatbelt Retractor Pretensioner - Not Configured in Firmware but Physcially Present.
|
There is an issue with the front-center shoulder pretensioner.
|
The Center Shoulder Pretensioner may not perform as designed.
|
|
1st Row Center Seatbelt Retractor Pretensioner - Cross Coupled.
|
There is a cross coupling with the front-center shoulder pretensioner.
|
The Center Shoulder Pretensioner may not perform as designed.
|