VCDOORRR_a122_eFuseManagementNonContinuous16V

Unexpected voltage seen on non-continuous device outputs.

Voltage is above 10V for 200ms on at least one of the device outputs while none of them are being driven

Voltage is below 10V and 10 seconds have passed since alert was set. If the alert sets 3 or more times, controller reset is required.

Electrical loads for mirror tilt up/down, mirror tilt left/right, mirror fold out/in, and mirror motor control may be unavailable.

Mirror fold and tilt functions limited

Electrical issue - Schedule service soon

customer;service-fix

Cybertruck