DPB_a013_softPedalChar
Description
Pressure sensor value too low for current Pedal Travel Sensor value.
Condition
The pressure sensor value is too low, the Pedal Travel Sensor value is too high, there is air in the hydaulic circuit, or there is a leak in the hydraulic circuit. A Brake Signal Monitoring (BSM) soft pedal characteristic alert occurs if the current pressure sensor value is too low for the current pedal travel sensor value.
Clear Condition
Good Check is performed, if pressure value is above issue detection limit for corresponding Pedal Travel sensor value and issue detection limit is > 0 bar.
Potential Impact
System will be running with internal degraded pedal map. Braking may require increased effort.
Customer Facing Message 1
Power braking assist reduced
Customer Facing Message 2
Braking may require increased effort
Audiences
customer;service-fix
Models
Model Y 2025+