BCS2C_w030_SeatConfigError
Description
Check if 5V_SW is enabled at startup; check that the seatID pins are being set low in correspondance with the desired side; run UDS routine 204 on the bootloader to read and store the seat config.
Condition
The ECU did not read the seat ID pins properly on reset
Clear Condition
The ECU read the seat ID pins and configured its side on reset
Potential Impact
The ECU may not respond to the desired signals
Customer Facing Message 1
Not Available
Customer Facing Message 2
Not Available
Audiences
service;service-fix
Models
Model S 2012-2020;Model X 2015-2020