BCFDM_w058_DoorConfigError
Description
Check if DOOR_READ_EN is enabled (pulled low) at startup; check that the doorID pins are being set low in correspondence with the desired side; run UDS routine 204 on the bootloader to read and store the side config.
Condition
The ECU did not read the door ID pins properly on reset or power was connected before harness with door ID pins
Clear Condition
The ECU read the door ID pins and configured its side on reset
Potential Impact
The ECU may not respond to the desired signals and ECU should be reset
Customer Facing Message 1
Not Available
Customer Facing Message 2
Not Available
Audiences
service
Models
Model S 2012-2020;Model X 2015-2020